Camden Door Controls :: CV-32 INVISION 32 ACCESS CONTROL

	Click For A Larger Image
Click For Technical Documents Across All Products

CV-32 INVISION 32 ACCESS CONTROL

Multi-site capability with up to 5000 cardholders per panel.
16 schedules, 40 holiday schedules with 128 time zones
Global and timed anti-passback with hard or soft enforcement
Multiple language - English, French, Spanish, Danish, Dutch and Chinese
Auto card expiry by date up to five years in advance
Multiple credentials per user
Remote site dial-up by schedule
Customized formats for exporting reports
Alarm panel interface

InVision32 panel stores up to 1400 transactions off-line
Flash firmware technology for easy upgrades
Reads 5 card formats per panel
Remote site dial-up capability by schedule
TCP/IP network ready. Up to 10 simultaneous client users.
Battery back-up on system memory
8 programmable outputs, 8 fully supervised programmable inputs
Supplied with choice of HID or AWID prox readers.

* CV-32 shown with AWID readers

We are currentlyshipping Invision 32 with version 3.5 software which has the following advantages/changes:

i) elevator controls

ii) can use RMOD

iii) maximum number of users (per panel) increased to 5000 (previously 2000)

iv) maxium number of transactions stored increased to 3000 (previously 1400)

v) integrates with Bosch alarm panel

VERY IMPORTANT If a new panel is added to an existing system (which has the older controllers) the new panel must be "rolled back" by loading it with the same software which runs the older system. Alternatively, the older panels could be upgraded by installing the CV-SU kit.

Scroll down or click here for Technical Documents and Photos

Model


CONTROLLERS/SOFTWARE
CV-32	CONTROL PANEL W/SOFTWARE, POWER SUPPLY & PLUG-IN TRANSFORMER	$
CV-128	EXPANDS SYSTEM TO 128 READER CAPACITY	$
CV-LNM	LAN INTERFACE MODULE (TCP/IP)	$
CV-CCM	RS232 TO RS485 CONVERTER. ENABLES COMPUTER TO BE HARDWIRED UP TO 4000 FEET FROM CONTROLLER.	$

CONTROLLER MODULES & UPGRADES


CV-RMOD	EXIT READER MODULE	$
CV-ELCON	ELEVATOR CONTROLLER W/ ONE 8-FLOOR RELAY BOARD	$
CV-EL8	8 FLOOR ELEVATOR MODULE W/WALL MOUNT METAL ENCLOSURE	$
CV-EL16	16 FLOOR ELEVATOR MODULE W/WALL MOUNT METAL ENCLOSURE	$
CV-SU	FIRMWARE & CHIP SET TO UPGRADE CV-32 CONTROLLER TO V3.5	$
1) CV-RMOD is an exit reader interface, which is used with our Invision 32 panel. It allows for in/out readers (on the same door) to be plugged into one of the reader ports, while leaving the other reader port available for controlling another door. Without the RMOD, having two readers on one door (in/out), would fill up the capacity of the panel. This is an effective and inexpensive means of expanding the capability of the system.
2) Each ELCON has two reader ports and a power supply, and is designed for up to a maximum of 32 floors (either one or two cabs, but totalling no more than 32 floors). ELCON comes with one 8 relay card mounted in the metal box. For more than 8 floors, you must order additional modules (EL-8 or EL-16).
3) Each elevator system requires at least 1 ELCON. The ELCON has a power supply, which will also power the other relay boards connected to it.
4) The CV-SU allows for a field upgrade from our older panels to the newest (version 3.5).

KITS


WITH HID READERS
CV-32H1	CONTROL PANEL W/SOFTWARE, POWER SUPPLY, PLUG-IN TRANSFORMER, 2 HID PROXPOINT MULLION READERS	$
CV-32H2	CONTROL PANEL W/SOFTWARE, POWER SUPPLY, PLUG-IN TRANSFORMER, 2 HID THINLINE ll SINGLE GANG READERS	$
CV-32H3	CONTROL PANEL W/SOFTWARE, POWER SUPPLY, PLUG-IN TRANSFORMER, 2 HID PROXPRO ll SINGLE GANG READERS	$
WITH AWID READERS
CV-32A1	CONTROL PANEL W/SOFTWARE, POWER SUPPLY, PLUG-IN TRANSFORMER, 2 AWID MULLION READERS	$
CV-32A2	CONTROL PANEL W/SOFTWARE, POWER SUPPLY, PLUG-IN TRANSFORMER, 2 AWID SINGLE GANG READERS	$

READERS/CARDS


HID
CV-6005	HID PROXPOINT MULLION READER, 2-3 INCHES READ RANGE	$
CV-5395	HID THINLINE II LOW PROFILE SINGLE GANG READER, 4-5 INCHES READ RANGE	$
CV-5455	HID PROXPRO II, SINGLE GANG READER, 6-9 INCHES READ RANGE	$
CV-5375	HID MAXIPROX READER, 16-29 INCHES READ RANGE	$
CV-5355KP	HID PROXPRO WITH KEYPAD	$
CV-6348PR	HID PROX READER WITH 8 BIT PIEZO KEYPAD	$
CV-653PR	HID PROX READER with RUGGED ALUMINUM VANDAL RESISTANT HOUSING	$
CV-CSH	HID PROXCARD II, CLAM SHELL STYLE	$
CV-KTH	HID PROXKEY, KEY TAG	$
AWID
CV-2400	AWID PROX READER, MULLION STYLE, 4-5 INCHES READ RANGE	$
CV-6820	AWID PROX READER, SINGLE GANG, 6-8 INCHES READ RANGE	$
CV-6840	AWID PROX READER WITH KEYPAD	$
CV-CSA	AWID PROX CARD, CLAM SHELL STYLE	$
CV-KTA	AWID PROX KEY TAG	$
CV-LR911	AWID LONG RANGE READER (9 - 11 ft)	$
CV-LRIN	INSTALLATION KIT FOR LR911	$
CV-LRMB	MOUNTING BRACKET FOR LR911	$
CV-WTA	WINDSHIELD TAG FOR LR911	$
CV-MTA	METAL TAG FOR LR911	$
The AWID LR-911 is a long-range reader which is primarily used for vehicle identification purposes. The "tag" is either mounted under the vehicle, or can be affixed to the windshield. Note, this reader is not compatible with other AWID prox cards/tags. There is a power point presentation on this product on the AWID website.